D-Grix

• Powerful concentrated formula.
• Penetrates surfaces removing residues such as oil, grease and most automotive fluids. It will not remove oxides and clay.
• D-Grix concentrate can be used to remove tough residue or diluted for general cleaning.
• It acts quickly, from 5 to 15 minutes.
• Prepare surfaces that require the application of other products such as: StampOver, Rostain and OneDeck.

• Exterior surfaces with construction waste.
• Floors and garage entrances, backyards, sidewalks, steps, stones or footprints.
• Concrete, brick, clay tiles, quarry, natural stones, marble, granite.
• It is not recommended to use on asphalt.

How to use

Before application:

• Make sure the surface is free of dust or any other debris.
• Cover any plants or other objects to protect them from possible contamination.
• Wear gloves and protective glasses.
• You can use a sprinkler for your application.

For difficult stains (concentrate):

• Apply concentrated D-Grix to dry surfaces.
• Scrub the stained area with a firm bristle brush.
• Wait 10 to 15 minutes for the product to act.
• Rinse thoroughly with a hose using the highest pressure possible. Excess product residue may interfere with the penetration of other protective products.
• If necessary repeat the process. In most cases one application will be sufficient.
• Be sure to water surrounding plants and grass before and after application.

For general cleaning (diluted):

• Dilute D-Grix with water in equal amounts (50/50) in a spray bottle. Apply to clean, dry surface by spraying a coat of the product.
• Wait 5 to 15 minutes.
• Scrub lightly with a broom.
• Rinse thoroughly with a hose using the highest pressure possible. Excess product residue may interfere with the penetration of other protective products.
• Be sure to water surrounding plants and grass before and after application.

Storage:
Keep the product in its original container tightly closed in cool, dry places.

Presentation and performance:

D-Grix is presented in a 4 liter container with an approximate yield of 80 m2 to 100 m2 if concentrated and 160 to 200 m2 if used diluted.

Performance may vary depending on the application method and the porosity, surface texture and intensity of the residue to be removed.